Allen-Bradley 20-750-ENETR

Specifications

20-750-ENETR is A PowerFlex component. This module is a Dual Ethernet/IP option adapter that directly installs to the PowerFlex drive. It supports Adapter and Tap mode, both capable of 10 Mbps Full-duplex, 10 Mbps Half-duplex, 100 Mbps Full-duplex, or 100 Mbps Half Duplex communication rates.

Up to Thirty (30) Ethernet connections can be made with this option adapter module. Both modes support 16 simultaneous MSG instruction connections. In adapter mode, one exclusive owner I/O connection is included.

20-750-ENETR supports system protocol which is Drive DPI protocol with data rate of 500 Kbps. This adapter may be connected in a variety of topologies such as star, linear, or device-level ring (DLR) network topologies.

20-750-ENETR also supports Integrated motion over Ethernet for the PowerFlexDrive series and the option adapter is configured in Tap mode.

20-750-ENETR has embedded Electronic Data Sheets (EDS). This means, EDS files are automatically loaded and the option adapter module may be easily recognized in the Ethernet I/P network.

option adapter module has embedded switches for setting the IP addresses. It is also compatible with the stand-alone tool BOOTP-DHCP. Status indicators are also provided for monitoring the module’s operation.

20-750-ENETR environmental specifications include an operating temperature of -10…+50 °C (14…122 °F). If this module is intended to serve as backup, thus a spare module, storage temperature requirement is -40…+85 °C (-40…+185 °F). Both environments shall have 5…95% noncondensing.

Allen-Bradley 20-750-ENETR module and the entire series of PowerFlex 755 modules come preinstalled with predictive diagnostics and DeviceLogix control technology. Other features of these drives include an Ethernet port that is designed for communication. The PowerFlex 755 drives are designed to be used to control permanent magnet motors. However, they also require proper configuration so that they can offer adequate protection against operations that are not stable by using CM or Power jumpers to help select between solid and non-solid grounds. It has four status indicators which show the mode of operation and network communication.

20-750-ENETR module also has Node address switches that set the network node address of the option module. Additional features of the 20-750-ENETR module include an operating mode jumper that selects the mode of operation for the module as well as the ENET1 and ENET2 network ports which help with the transfer of data on the 100Base-TX Ethernet connections.

Advantage Products

FAQ

1.Q:Other suppliers have a better price than yours?

A: ''To create the greatest benefit for clients'' is our belief, if you have a better price, please let LANEN know. We will try the best to meet your target price and support you.

2.Q:What's the delivery time ?

A: Normally we have enough stock for regular models(such as PLC FX3U-64MR/ES-A ) and we can deliver immediately at the same day after payment received. For some products that is not in stock, we normally deliver within one week.

3.Q:What is the standard of package?

A: Export standard package or special package according to customer requirement.

4.Q: Could Wusu provide technology support?

A: We're in this field for more than 15 years and we have our own technical team. Our engineer could give suggestion and help to solve the problem if there's any problem.

5.Q:Does Wusu keeps goods in stock or only trading?

A: We have warehouses in Guangzhou and HongKong and keep large stock of goods in it, that's how we promise fast delivery.

All products are covered by the Wusu Industrial Automation Company's 1 Year Warranty. Manufacturer's Warranty does not apply.

Refund and replacement

1. Please contact us within 7 days if you have any question after you receiving the items.

2.The returned items has to be in its original condition, specific reason for the return, we will 

issue a return or replacement for your order after we received the returns.

3.The buyer is responsible for all the shipping cost incurred.