Allen-Bradley 2094-BM02-S
Allen-Bradley 2094-BM02-S Kinetix 6000 Axis Module
hot selling
I year warranty
Best choice and best discounts
Contact us:alice@cn2014.com
Brand :
Allen-BradleyPart number :
2094-BM02-SPayment :
bank transfer, T/T,PayPal, Alibaba,AlipayProduct Origin :
MexicoColor :
New And OriginalLead Time :
In StockThe Allen-Bradley 2094-BM02-S is a Kinetix 6000 Drive component. This module is a 400VAC class Axis Module with continuous current of 10.3 A and peak current of 14.6 A. It has an efficiency of 98% and short-circuit current rating of 200,000 A (rms) symmetrical and integrated Safe Torque-off feature.
The Allen-Bradley 2094-BM02-S is a multi-axis module that is a component product of the Kinetix 6000 Multi-Axis Drive Servo system. This module comes with an integrated Safe-Torque Off (STO) safety functionality that can be applied for applications that require up to Safety Integrity Level (SIL) 3 and Performance Level (PLe). This axis module is a single wide module that supports up to Seven (7) for each 8-axis power rail.
The 2094-BM02-S supports bandwidth velocity loop frequency of 500 Hz and Current loop frequency of 1300 Hz with Pulse Width Modulation (PWM) frequency of 4 kHz. The nominal input voltage of this axis module is 650VDC with continuous current requirement (rms) of 10.3 Amperes and continuous Current (sine) 0-pk of 14.6 Amperes.
With peak enhancement, this axis module may be used in applications that require fast acceleration and deceleration. The 2094-BM02-S has 150% standard peak inverter current rating and significantly increases up to 250% when peak enhanced.
The 2094-BM02-S has a continuous current (rms) of 10.3 Amperes and continuous current (sine) 0-pk of 14.6 Amperes with efficiency of 98% and 200,000 Ampere (rms) symmetrical, short circuit current rating. This axis module has a 115 Ohm internal shunt resistor with internal shunt continuous power of 50 Watts and peak power of 5.6 kWatts.
Prior to the installation of the Allen-Bradley 2094-BM02-S multi-axis servo drive, clearances should be made around the top and the bottom of the drive in order to allow proper airflow. This is important in order to guarantee smooth operations and prevent overheating. Its installation cabinet depth must be a minimum of 10.7 inches. If the drive is going to be installed in a cabinet, this cabinet should be tall enough to fit the drive and enable it to have a ventilation mechanism from an external cooling system.
If the Allen-Bradley 2094-BM02-S multi-axis servo drive is going to be installed in an enclosure, its unshielded cables must be kept as short as possible and the shunt power cables must be separated from sensitive cables. The Allen-Bradley 2094-BM02-S multi-axis servo drive must be used with circuit protection. The use of a circuit breaker or a fuse might help to maintain the drive in good condition since it prevents the occurrence of short circuit. In the event of fault, the power-transistor control signal is disabled, removing motor torque without shutting down the entire 2094-BM02-S drive. This reduces production and energy waste and minimizes downtime. Once the Allen-Bradley 2094-BM02-S multi-axis servo drive has been programmed, it must be tested multiple times in order to ensure that it has the correct and proper configuration and to guarantee that the programming process has been achieved successfully.
Advantage Products
Allen Bradley | 150-S135NBD | Allen Bradley | 193-T1AB13 |
Allen Bradley | 20F1ANC170JN0NNNNN | Allen Bradley | 2711P-T10C22D8S |
Allen Bradley | 5069-OA16 | Allen Bradley | 2198-D020-ERS4 |
Allen Bradley | 1756-IF16IH | Allen Bradley | 1756-L83ES |
Allen Bradley | 1606-XLE120E | Allen Bradley | 22C-D017N103 |
Allen Bradley | 1783-NATR | Allen Bradley | 2711P-T7C4A9 |
Allen Bradley | 1791-16A0 | Allen Bradley | 1734-8CFG |
Allen Bradley | 1734-TB3 | Allen Bradley | 2080-LC10-12QWB |
Allen Bradley | MPL-A310F-HK22AA | Allen Bradley | 1756-RMC1 |
Allen Bradley | 1756-PA72K | Allen Bradley | 2198-D006-ERS3 |
FAQ
1.Q:Other suppliers have a better price than yours?
A: ''To create the greatest benefit for clients'' is our belief, if you have a better price, please let LANEN know. We will try the best to meet your target price and support you.
2.Q:What's the delivery time ?
A: Normally we have enough stock for regular models(such as PLC FX3U-64MR/ES-A ) and we can deliver immediately at the same day after payment received. For some products that is not in stock, we normally deliver within one week.
3.Q:What is the standard of package?
A: Export standard package or special package according to customer requirement.
4.Q: Could Wusu provide technology support?
A: We're in this field for more than 15 years and we have our own technical team. Our engineer could give suggestion and help to solve the problem if there's any problem.
5.Q:Does Wusu keeps goods in stock or only trading?
A: We have warehouses in Guangzhou and HongKong and keep large stock of goods in it, that's how we promise fast delivery.
All products are covered by the Wusu Industrial Automation Company's 1 Year Warranty. Manufacturer's Warranty does not apply.
Refund and replacement
1. Please contact us within 7 days if you have any question after you receiving the items.
2.The returned items has to be in its original condition, specific reason for the return, we will
issue a return or replacement for your order after we received the returns.
3.The buyer is responsible for all the shipping cost incurred.
DHL/FedEx/UPS/TNT/EMS/Aramex for fast and Door-to-Door shipment.
By Air or by Sea for bulk of batch goods.
Customer can specify freight forwarders or other shipping Methods.
Alibaba TT Bank transfer, Western Union, Paypal aliexpress only etc.
Copyright 2024 @ Xiamen Wusu Network Technology Co., Ltd. .All Rights Reserved.Sitemap | Blog | XML | Privacy Policy Network Supported