Inductive conductivity transmitter with switching contacts
The device is used for measuring and controlling the conductivity or the concentration of liquid media. The integrated temperature measurement enables precise and quick compensation. Additional functions allow the combined toggling of measuring range and temperature coefficient.
hot selling
1 year warranty
Best choice and best discounts
Contact us:alice@cn2014.com
Brand :
JUMOPart number :
202755Payment :
bank transfer, T/T,PayPal, Alibaba,AlipayProduct Origin :
GermanyColor :
New And OriginalLead Time :
In StockTechnical data
Measurands | Inductive conductivity; concentration of NaOH, HNO3; temperature |
Sensor material | PP or PVDF |
Outputs | 2 outputs and 2 potential-free contacts |
Mounting | Pipe mounting, wall mounting |
Features | Operation via keypad and setup program; up to 4 measuring ranges and temperature coefficients can be activated; fast-response temperature sensor |
Protection type | IP67 |
Versions | Combined unit (transmitter and measuring cell in one device); split version (transmitter and measuring cell connected via cable) |
Areas of application | Water and wastewater engineering; cooling tower monitoring (salt dilution control); rinsing baths (electroplating plants); air washers |
JUMO CTI-500
Inductive Conductivity/Concentration
and Temperature Transmitter
with switch contacts
Type 202755
Brief description
The device is used for the measurement/control of conductivity or concentration in liquid media.
It is particularly suitable for application in media where severe deposits of dirt, oil, grease or
gypsum/lime precipitates are to be expected. The integrated temperature measurement
enables fast and accurate temperature compensation, which is of special importance when
measuring conductivity. Additional functions permit the combined changeover of measuring
range and temperature coefficient.
Two built-in switching outputs can be freely programmed to monitor conductivity/
concentration and /or temperature limits. It is also possible to assign alarm and control
functions (dilution).
The device is operated either from the membrane keypad and plain-text graphics display
(operator language can be changed over) or through the user-friendly PC setup program. The
display can be read off by simply rotating the housing cover. This applies to the installation both
in horizontally and vertically arranged pipes. By using the setup program, the device
configuration data can be saved for plant documentation and printed out. To prevent any
tampering, the device can also be supplied without keypad or display. In this case, the setup
program is needed for programming.
The JUMO CTI-500 is available either as a combined unit (transmitter and measuring cell
together in one unit) or as a split version (transmitter and cell connected by cable). The split
version is particularly suitable for plant subjected to strong vibration and/or significant heat
radiation at the measurement point, or for installation on sites that are difficult to access.
Immersion models up to 2000 mm are available for application in open containers or sluices.
Typical areas of application: Freshwater and wastewater engineering, air conditioning
systems and cooling tower monitoring (dilution control), rinsing baths (e.g. monitoring
electroplating baths), inlet and final checks in factory water treatment plant, concentration
monitoring, vehicle wash plant, etc.
|
|
Block diagram
![]() |
Key features
• Dilution control
• Activation of up to four ranges
• Activation of up to four temperature
coefficients
• Concentration measurement with
- two predefined curves
- one freely definable curve
(through the setup program)
• Fast-response temperature sensor
• Temperature compensation
- linear
- natural water
- individual characteristic (learning
function)
• Operation
- via keypad and LC display
- through setup program
• Operator languages: English, French,
German, Italian, Dutch, Spanish, Polish,
Portuguese, Russian, Swedish
• By using the setup program:
- user-friendly programming
- plant documentation
|
Type | Part no. |
202755/10-168-0-82/000 | 00445842 |
202755/10-168-0-82/268 | 00458083 |
202755/15-168-0-82/000 | 00445843 |
202755/15-607-0-82/000 | 00445845 |
202755/65-706-1000-82/000 | 00457536 |
FAQ
1.Q:Other suppliers have a better price than yours?
A: ''To create the greatest benefit for clients'' is our belief, if you have a better price, please let LANEN know. We will try the best to meet your target price and support you.
2.Q:What's the delivery time ?
A: Normally we have enough stock for regular models(such as PLC FX3U-64MR/ES-A ) and we can deliver immediately at the same day after payment received. For some products that is not in stock, we normally deliver within one week.
3.Q:What is the standard of package?
A: Export standard package or special package according to customer requirement.
4.Q: Could Wusu provide technology support?
A: We're in this field for more than 15 years and we have our own technical team. Our engineer could give suggestion and help to solve the problem if there's any problem.
5.Q:Does Wusu keeps goods in stock or only trading?
A: We have warehouses in Guangzhou and HongKong and keep large stock of goods in it, that's how we promise fast delivery.
All products are covered by the Wusu Industrial Automation Company's 1 Year Warranty. Manufacturer's Warranty does not apply.
Refund and replacement
1. Please contact us within 7 days if you have any question after you receiving the items.
2.The returned items has to be in its original condition, specific reason for the return, we will
issue a return or replacement for your order after we received the returns.
3.The buyer is responsible for all the shipping cost incurred.
DHL/FedEx/UPS/TNT/EMS/Aramex for fast and Door-to-Door shipment.
By Air or by Sea for bulk of batch goods.
Customer can specify freight forwarders or other shipping Methods.
Alibaba TT Bank transfer, Western Union, Paypal aliexpress only etc.
Copyright 2024 @ Xiamen Wusu Network Technology Co., Ltd. .All Rights Reserved.Sitemap | Blog | XML | Privacy Policy
Network Supported