JUMO heatTHERM-AT and DR 603070 Surface-mounted thermostat

● Versions： Temperature controller (TR), temperature monitor (TW), safety temperature monitor (STW), safety temperature limiter (STB)

● Switching capacity： 16 A, 230 V

● Switching elements： Single-pole snap-action switch

● Maximum control range/limit value： 350 °C

● Protection type： IP40, IP54 optional

● Areas of application： Building automation, heating industry, air-conditioning industry, control cabinets (DR), general mechanical engineering

● Approvals： DIN, UL, PED, EAC

● Features： Single and double thermostat; room thermostat; thermostat for DIN-rail mounting; exhaust gas temperature monitor

JUMO heatTHERM-AT and JUMO heatTHERM-DR Type 603070, Surface-Mounted or Room Thermostat Versions   Special features   ● -connection technology - reduced installation time by 50 %   ● Stable switching point position due to ambient temperature compensation (standard)   ● Max. switching capacity 16 A, 230 V   ● Tested according to DIN EN 14597   ● Operating life at least 250,000 switching cycles for TR and TW   ● Switching point deviation during the entire operating life of up to ± 5%   ● Protection type max. IP54   ● UL approval (extra code 061)    Brief description High application flexibility and the latest connection technology are the essential equipment features of this new thermostat series.   The thermostat case is suitable for all common installation types such as wall mounting, immer- sion sleeve, and contact fastening. It can be used universally and reduces the variant range be- cause different mounting types must no longer be taken into account.   The JUMO heatTHERM-DR (type 7+8) type is a specific variation with a special housing bottom section for DIN rail or wall mounting. As a result, easy mounting on mounting rails TH35 accord- ing to DIN EN 60715 (e.g. in control cabinets) is possible. This variant considerably reduces the mounting time. The flue gas automatic reset temperature limiter JUMO heatTHERM-AT locks the gas/oil vessel that is connected in parallel with the wood vessel to a chimney.   For these international innovative surface-mounted thermostats with "Push-In®" terminal tech- nology, the connection wires are only inserted into the terminal point up to the stop - that's it! No tool is required for connecting the wire or strand with a ferrule and the wiring becomes safer. In this manner, the costs and time required for connection are considerably reduced compared to the conventional screw terminal.   The "Push-In®" terminal technology allows direct switching of loads up to 16 A at 230 V AC. The installation costs can be reduced further because a load contactor is no longer required.   Available are temperature controllers (TR), temperature monitors (TW), safety temperature mon- itors (STW), safety temperature limiters (STB) as single or double thermostats, and flue gas tem- perature monitors (ATW).   Approvals according to DIN EN 14597, DGRL, and UL indicate the high quality standards for this product series.

Type 603070/0170 (TR/STB)                             Type 603070/0001 (TR)                                   Type 603070/ 0002 (TW)                                     Type 603070/0002 (TW)

Advantage Products

FAQ

1.Q:Other suppliers have a better price than yours?

A: ''To create the greatest benefit for clients'' is our belief, if you have a better price, please let LANEN know. We will try the best to meet your target price and support you.

2.Q:What's the delivery time ?

A: Normally we have enough stock for regular models(such as PLC FX3U-64MR/ES-A ) and we can deliver immediately at the same day after payment received. For some products that is not in stock, we normally deliver within one week.

3.Q:What is the standard of package?

A: Export standard package or special package according to customer requirement.

4.Q: Could Wusu provide technology support?

A: We're in this field for more than 15 years and we have our own technical team. Our engineer could give suggestion and help to solve the problem if there's any problem.

5.Q:Does Wusu keeps goods in stock or only trading?

A: We have warehouses in Guangzhou and HongKong and keep large stock of goods in it, that's how we promise fast delivery.

All products are covered by the Wusu Industrial Automation Company's 1 Year Warranty. Manufacturer's Warranty does not apply.

 Refund and replacement

1. Please contact us within 7 days if you have any question after you receiving the items.

2.The returned items has to be in its original condition, specific reason for the return, we will 

issue a return or replacement for your order after we received the returns.

3.The buyer is responsible for all the shipping cost incurred.