JUMO TYA 203 709063 Three-phase thyristor power controller

JUMO TYA 203

Three-phase

Thyristor power controller

for control of resistive/inductive loads

The JUMO TYA 203 is the result of consistent development of JUMO power controller technology and switches resistive and resistive/inductive (transformer) loads via a three-wire circuit. It

enables the wiring of the load in a star connection (with and without N conductor) or a delta connection. An open delta connection (six-conductor connection) can also be implemented. The

microprocessor controlled power controller displays all parameters in an LCD display with

background lighting. It can be operated using the four keys at the front.

Thyristor power controllers are used where larger resistive and resistive/inductive loads have to

be switched, e.g. in industrial furnace construction and plastics processing. 

The Thyristor power controller with a load current of 20 A can either be clipped to a 35 mm

mounting rail or fitted to the wall on a mounting plate. 

Devices with a load current greater than 20 A can only be mounted on the wall. 

The TYA 203 works in phase angle control mode or in burst firing mode. In burst firing mode,

the phase angle of the first half-wave can be cut so that transformer loads can also be operated.

All Thyristor power controllers are fitted with a semiconductor fuse. 

Available subordinate control loops are U, U2, I, I2, or P control. 

When using the subordinate control loop, power voltage fluctuations during control processes

have no influence on the line segment to be controlled.

The option of specifying a base load is available.

To avoid high starting currents, a soft start can be set.

The Thyristor power controllers meet the operating conditions of DIN EN 50178.

The device has to be grounded in accordance with the regulations of the responsible energy

supply company

● Subordinate control loop： U, U2 control (as a standard feature); I, I2, P control (optional)

● Load voltage： 24 V, 42 V, 115 V, 230 V, 400 V, 460 V, 500 V

● Load currents： 20 A, 32 A, 50 A, 100 A, 150 A, 200 A, 250 A

● Operating modes： Phase-angle control, burst-firing operation, half-wave control, SSR logical operation, fast logical operation, alpha start, soft start

● Special features： Current limiting, mains load optimization, dual energy management, "Teach-In" function (partial load failure detection), "r-control" (resistance limitation), intelligent diagnosis system, integrated semiconductor fuse, device configuration without auxiliary voltage, vibrant display, "True RMS" (root mean square)

● Approval： cULus

● Ambient temperature： -20 to +70 °C

● Load type： Resistive load, resistive inductive load, cold/warm ratio 1:16, transformer load, infrared emitter (short, medium, long-wave), carbon emitter

● Control voltage： Control voltage = load voltage

● Configuration： Setup/USB-powered; plain text display on the device

● System interfaces： Modbus, PROFIBUS DP, system bus JUMO mTRON T, PROFINET, EtherCAT

Type

Accessories

Installation kits

General accessories

FAQ

1.Q:Other suppliers have a better price than yours?

A: ''To create the greatest benefit for clients'' is our belief, if you have a better price, please let LANEN know. We will try the best to meet your target price and support you.

2.Q:What's the delivery time ?

A: Normally we have enough stock for regular models(such as PLC FX3U-64MR/ES-A ) and we can deliver immediately at the same day after payment received. For some products that is not in stock, we normally deliver within one week.

3.Q:What is the standard of package?

A: Export standard package or special package according to customer requirement.

4.Q: Could Wusu provide technology support?

A: We're in this field for more than 15 years and we have our own technical team. Our engineer could give suggestion and help to solve the problem if there's any problem.

5.Q:Does Wusu keeps goods in stock or only trading?

A: We have warehouses in Guangzhou and HongKong and keep large stock of goods in it, that's how we promise fast delivery.

All products are covered by the Wusu Industrial Automation Company's 1 Year Warranty. Manufacturer's Warranty does not apply.

 Refund and replacement

1. Please contact us within 7 days if you have any question after you receiving the items.

2.The returned items has to be in its original condition, specific reason for the return, we will 

issue a return or replacement for your order after we received the returns.

3.The buyer is responsible for all the shipping cost incurred.