JUMO

The product records the pressure of liquid and gaseous media according to the piezoresistive or thin-film strain gauge measuring principle. The value is then converted into an electrical signal. The transmitter is suitable for universal use.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com

The product is designed according to hygienic requirements and offers a high degree of process reliability. The nominal values set by default are between 400 mbar and 60 bar. The transmitter is used in such places as dairies and breweries.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

The type 4304 product acquires the negative pressure, overpressure, or differential pressure of non-aggressive gases. Upon request, the device can be equipped with an LCD display. The transmitter is mainly used in heating engineering, air-conditioning, and ventilation technology.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com    

The JUMO heatTHERM-DR (design type 7+8) type is a specific variation with a special case bottom section for DIN rail or wall mounting. As a result, easy installation on mounting rails TH35 according to DIN EN 60715 (e.g. in control cabinets) is possible.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

The room thermostat ATHR is used in heating, air conditioning and ventilation technology, in commercial premises, nurseries and stables to control heating, cooling, air conditioning and ventilation.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

Vibration-resistant screw-in RTD temperature probes allow temperatures to be measured under pressure in engines and compressors as well as in plant engineering and shipbuilding.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

Mineral-insulated thermocouples are made of a flexible, thin-walled sheath cable in which the thermocouple wires are embedded in compressed fire-resistant magnesium oxide. The thermal transfer between the sheath and the thermocouple enables short response times and high measuring accuracy. A compression fitting allows mineral-insulated thermocouples for hydrogen applications up to over 1000 bar.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

The wireless transmitter measures temperature and other process variables. The compact design type of the aerial battery housing allows for simple installation on type B DIN terminal head.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

The Wtrans receiver T01, in combination with suitable Wtrans transmitters, is used for the mobile or stationary measurement of the following physical measurands: temperature, pressure, and humidity. The wireless sensor technology also works in a harsh industrial environment.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

Screw-in RTD temperature probes are predominantly used for measuring temperatures in liquids and gases. The installation type enables the formation of reliable seals for both vacuum and overpressure applications.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com  

The RTD temperature probes can be built with terminal heads made of either stainless steel, aluminum die-cast, or plastic. Various process connections are available for the different requirements of sub-areas in the food and pharmaceutical industry.   hot selling   1 year warranty   Best choice and best discounts   Contact us:alice@cn2014.com